Electropolish WA is an acidic solution, used at full strength, with current (anodically) for polishing, machining, sizing, burr removal, and as a means of smoothing and leveling any one of the following metals: Steel (low and high carbon) and stainless steel alloys (200, 300 and 400 series).
Archives: Product Bulletins
Brite Dip 6
Brite Dip 6 is a viscous mixture of concentrated acid for brightening and chemically polishing copper and copper-based alloys.
ENEROX DW 73
ENE Electropolish NC-3
The ENE Electropolish NC-3 is a proprietary electrolyte to which chrome is added to. It is formulated and designed to process a wide variety of steels when utilized under proper conditions and in conjunction with suitable equipment. The ENE Electropolish NC-3 is a stable, easily controlled and economic solution readily adaptable to obtain the many… Read more »
ENE ELECTROPOLISH 15 G
ENE Electropolish #1
The ENE Electropolish #1 is a proprietary electrolyte formulated and designed to process, when utilized under proper conditions and in conjunction with suitable equipment, magnetic and non- magnetic stainless steels. The ENE Electropolish #1 is a stable, easily controlled and economic solution readily adaptable to obtain the many advantages inherent in the electropolishing process.
Brite Dip Acid
Brite Dip Acid is a pre-mixed nitric and sulfuric acid-based system designed for the brightening, cleaning, and mild pickling of brass, copper, copper-based alloys, and nickel-silvers. Formulated to produce high brightness with a minimum tendency to etch, Brite Dip Acid is an economical system for preparing brass prior to plating, for removing light tarnish and… Read more »
Laser® Export Concentrate
Laser® Export Concentrate is a special blend to be used only in situations where shipping costs and import tariffs would prevent the use of Laser EX, Laser EX 50, or Laser S. Laser Export Concentrate would be used to prepare Laser products, which would then be used under the normal operating conditions prescribed in the… Read more »
Laser® Fe Replenisher
Laser® FE Replenisher is a concentrated acidic fluoride solution used to replenish the Laser FE working bath. Please refer to the Laser FE product bulletin for complete details on operating conditions and instructions for the Laser FE process.
Laser® FE
Laser® FE is a room temperature, hydrogen peroxide-based immersion chemical polishing process designed to provide bright steel surfaces. It may also replace vibratory mass finishing of carbon steels. Benefits of using Laser FE in place of vibratory mass finishing include an extremely short process cycle and no loud or expensive vibratory bowls. Laser FE is… Read more »