Chemical Polishing Products
Chemical Polishing: Aluminum
| Bright Dip 8-EL |
A mixture of acids and additives blended to produce a bright, reflective surface on wrought aluminum alloys. Immersion based. |
|
Back to top  Chemical Polishing: Copper Alloys
Brite Dip 4 |
Used at room temperature. A mixture of concentrated acids for brightening and chemically polishing copper and copper based alloys. |
| Copperbrite |
Offering a bright finish and high luster, this is a heavy-duty ferric sulfate, sulfuric acid based product. Highly effective at removing oxides and scale from copper and brass alloys. |
| Laser ACB 50 |
Quickly dissolves heavy oxides to produce a matte surface. This peroxide/sulfuric acid system produces a matte surface well-suited for subsequent metal drawing, rolling or sheet
operations. |
| Laser Brilliant Dip NS |
A one-step, acidic liquid concentrate. It removes the oxide film produced in the laser chemical polish, lead sulfate residue common to leaded brass alloys, and eliminates the redness occasionally found on brass after the conventional sulfuric acid brilliant dip. |
| Laser EX 50 |
Provides a high luster on brass and most copper alloys. This peroxide based product may offer a chemical alternative to buffing. | Back to top Chemical Polishing: Steel
| Laser Fe |
A room temperature, hydrogen peroxide-based immersion process designed to polish steel and provide bright surfaces. |
| SR Post Dip |
A highly alkaline, nitrite-based post-dip for the Laser Fe steel polishing system. Will remove any smut present on steel parts after processing and help prevent flash rusting. | Back to top Chemical Polishing: Stainless Steel
| Electropolish 500 |
Used at full strength, this acidic solution works with current (anodically) for polishing, sizing, burr removal, and leveling of both steel (high and low carbon) and stainless steel alloys (200,300, and 400 series). |
| ENE™ Electropolish 15 G |
Very well suited for processing 400 series stainless steels, this acidic solution is used at full strength - with current (anodically) - for polishing, sizing, burr removal, and leveling of both steel (high and low carbon) and stainless steel alloys. |
| ENE™ Electropolish MS 111 |
An acidic solution, used at full strength - with current (anodically)- for sizing, burr removal, and leveling of both steel (high and low carbon) and stainless steel alloys. Especially well suited for edge sharpening. |
Stainless Steel Bright Dip
|
Free of fluorides and chromates, this liquid acidic product will brighten and passivate 300 series stainless steel, monel and kovar. | Back to top Chemical Polishing: Zinc
| Die Brite 54 |
Chromate free, this liquid acidic product for chemical polishing, brightens and conditions the surface of zinc die castings for subsequent operations such as electroplating, blacking and chromating. | Back to top
|
|