Industrial Rapid Metal Stripping

Rapid metal stripping means faster processing for increased efficiency. Hubbard-Hall’s metal strippers are non-electrolytic, immersion chemistries.

These chemical products strip metal that is electroplated or electroless plated without impacting the base metal. Benefits of non-electrolytic, immersion metal strippers include:

No racking required
Low start up cost
Ease of operation
Minimizes base metal attack
Works well with complex part geometries

By Substrate

Nickel
|
Copper
|
Other

Rapid Metal Stripping: Nickel

Stripol™ CBR	Pale yellow, dry powder metal stripper. Mixed with water and sulfuric acid, it strips electroplated nickel from copper and copper alloys. May be stripped either in bulk (barrel or basket) or on racks.
Stripol™ Ni Ultra	Non-regulated, single component liquid designed to rapidly strip nickel and nickel alloys from all substrates typically encountered in the metal finishing industry.
Stripol™ PONI	This metal stripper is a non-regulated, single component powder designed to rapidly strip nickel and nickel alloys from all substrates.

Rapid Metal Stripping: Copper

Cuprastrip SYSTEM

Cyanide-, chromate- and nitrite/nitrate- free metal stripper. This alkaline copper stripping composite solution is effective in removing copper electro plate from ferrous metals.

Rapid Metal Stripping: Other

Stripol™	Water soluble powder used with sodium cyanide or with sulfuric acid for stripping plated metals from any of the base metals such as steel, cast iron, stainless steel, brass, copper or magnesium. The solution makeup will depend upon which basis metal is involved.
Stripol™ PVD	Metal Stripper used on selected Physical Vapor Deposition (PVD) coatings. This product can be used to strip ZrN coatings off substrates such as stainless steel, ABS plastic and aluminum. Safe for chrome and nickel-plated underlying substrates.

Stripol NI Ultra